M85-M100 Methanol Gasoline Additive
Introduction of M85-M100 methanol gasoline:
Tiande brand M85-M100 methanol gasoline is produced by prescribed technology by using heat-value enhancer, low and high temperature antioxidants, rust preventive, metal corrosion inhibitor and some other special selected chemical materials. It has excellent performances such as antioxidant resistance and good corrosion protection which can avoid abrasion and corrosion on related parts of vehicles. It mainly solves problems such as low heat value and strong corrosion of methanol using as fuel in internal-combustion engine.
Features of Tiande brand M85-M100 methanol gasoline additive:
1) Easy ignition in low temperature: Tiande brand M85—M100 methanol gasoline additive contains effective heat-value enhancer, which solves the problem of cold start in low temperatures. It can increase fuel's burning time which enables this fuel to have advantages such as fast start, smooth acceleration and strong power.
2) Good performance of corrosion protection: Tiande brand M85—M100 contains corrosion inhibitor: alkaline group in molecule reacts with methanol so as to inhibit methanol's swelling effect on rubber parts and also inhibit methanol’s corrosion on metal parts, which greatly reduces damages on parts vehicle caused by methanol.
3) Fine solubility: Methanol fuels prepared by Tiande brand methanol gasoline additive are infinitely soluble with gasoline under temperature ranged from -40℃~40℃ without phase separation and no emulsification and can be stored for a long time.
Technical specifications of M85-M100 methanol gasoline additive:
Appearance
|
faint yellow transparent liquid without deposits or suspended substance
|
Density
|
0.755~0.760g per cubic centimeter (20 Celsius degrees)
|
Actual colloids
|
no more than 5 mg per 100 ml
|
Copper strip corrosion
|
no more than 1 (50 Celsius degrees,3 hours)
|
Water content
|
no more than 0.2% (Volume Fraction)
|
Mechanical impurities
|
no more than 0.01%
|
|